Adults

The Syntax Mips® combines a touch of European flair with slightly deeper coverage and high-performance features — all tucked into a very slim design. The Syntax Mips® combines a touch of European flair with slightly deeper coverage and high-performance features — all tucked into a very slim design. The fit is luxurious and secure, thanks to our highly adjustable Roc Loc™ 5 Air Mips system that allows you to customize fit and feel for great stability and long-range comfort while providing an added measure of protection from rotational forces in the event of an angled impact. The outer shell is molded from a tough polycarbonate that's fused permanently to the EPS foam liner using our In-Mold construction process to enhance durability and ventilation without excess bulk. FEATURES - HARDSHELL WITH IN-MOLD HARDBODY™ LOWER WRAP — The two-piece shell combines a tough outer hard shell with a polycarbonate lower shell permanently fused to the liner for durability without excess weight. - INTEGRATED MIPS® BRAIN PROTECTION SYSTEM — All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated Mips-equipped helmets is to reduce rotational forces. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. - ROC LOC 5 AIR MIPS FIT SYSTEM — This revolutionary fit system adds a new dimension to helmet performance by enhancing cooling, as well as fit comfort and stability. Using a patented design that suspends the helmet just slightly off the top of the skull, Roc Loc 5 Air Mips allows cool airflow to pass directly over your head, further enhancing the performance of vents and internal channeling that exhaust heat out of the helmet. Fit and feel adjustments mimic the Roc Loc 5 Mips, allowing you to easily custom tune fit tension and fore-aft tilt of the helmet in seconds using a single hand. - WIND TUNNEL VENTILATION — Giro helmets are developed utilizing our proprietary Wind Tunnel™ ventilation system. This elaborate design combines active vents in the helmet's shell with exhaust channels inside the helmet that thrust fresh, cool air over and around the rider's head while forcing heat and stale air out. It's the most effective cooling system available, and a difference you can feel every time you ride. - IONIC+® PADDING — Pure Silver is the secret ingredient that gives IONIC+® the power to provide natural, permanent odor protection to keep your helmet feeling fresh. HIGHLIGHTS - Ionic+™ anti-microbial padding - Featherweight webbing with Slimline™ Buckle Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older E.U.: CE EN1078

The Synthe II MIPS is an icon of road helmet design, combining the performance advantages of a compact profile with great cooling power and luxurious comfort for road and gravel riders. The Synthe MIPS Helmet offers good looks in a slim design while offering more coverage on the back of the helmet for a little extra assurance. The compact form of the Synthe MIPS slips through the air with ease across multiple yaw and head angles and offers impressive cooling power. Key features include the Roc Loc Air fit system with 2-way fit tuning and Aero Mesh Panels with a dedicated port for securely docking sunglasses as you ride. The Synthe MIPS also has the Multi-Directional Impact Protection System, which we believe can redirect energy and provide more protection in certain impacts. - MIPS-equipped—to redirect impact energy, providing more protection in certain impacts: - Construction - In Mold construction - Thermoformed Sl roll cage reinforcement Shell type: - Polycarbonate shell - Number of vents: 26 Ventilation type: - Wind Tunnel Vents with internal channeling Fit System: - Roc Loc 5 Air Impact liner type: - EPS

The Vanquish MIPS is the pinnacle of high-performance road cycling helmets, featuring the innovative TransformAir design that actively streamlines airflow to reduce drag. Inside the Vanquish is an EPS liner with progressive layering, and Giro's renowned RocLoc Air system seamlessly integrated with MIPS technology to enhance comfort and cooling power while providing an additional measure of protection. So whether you're hammering off the front, smashing an Ironman course, or laying down maximum wattage in the dash to the finish line, the Vanquish shapes the wind to work for you.

The Vasona MIPS helmet combines sleek, lightweight design with an integrated Multi-Directional Impact Protection System (MIPS) that can redirect energy and provide more protection in certain impacts, giving you the latest in head protection on the road or trail. Made in a comfortable, Universal Fit women's size with Giro's adjustable Roc Loc Sport fit system, the Vasona's fit can be custom-tuned with a simple turn of the dial to make fitting fast and hassle-free. And with a range of colors to suit almost any style, you can choose exactly how your on-bike style comes together.

The Verce MIPS is Well Equipped to Help You Blaze New Trails. Our Roc Loc Sport Systems allows you to quickly and easily dial in your fit and the plush Quick Dry Padding provides a comfortable feel. The Verce MIPS also features an integrated Multi-directional Impact Protection System (MIPS), which can redirect energy and provide more protection in certain impacts. Integrated MIPS (Multi-directional Impact Protection System) - Allows you to customize fit/feel for great stability and long-range comfort while providing an added measure of protection from rotational forces in the event of an angled impact - Reflectivity: Reflectivity - Construction: In Mold Construction - Full Hardbody Shell - Shell Type: Polycarbonate Shell - Sport: Cycling - Visor: Removable Visor - Number of Vents: 18 - Interior/liner Type: Extra-plush Padding - Gender: Womens - Fit System:roc Loc Sport MIPS - Impact Liner Type: Eps - Certification: CPSC Bicycle

The Agilis W MIPS offers assured style and performance for women, with a sleek silhouette, airy design, and MIPS technology. The Agilis MIPS W is the right choice for women looking for a helmet that combines airy design with slightly deeper coverage and a host of performance features aimed at road and multi-surface riding. The fit is comfortable and secure thanks to our adjustable Roc Loc 5.5 MIPS system that combines fit and positioning adjustments while integrating with MIPS technology for an added measure of protection in the event of an angled impact. The outer Hardbody shell extends to the inside of the helmet, and is molded from a tough polycarbonate that's fused permanently to the EPS foam liner using our In-Mold process to enhance durability and ventilation without excess bulk. The fit is comfortable and secure thanks to our adjustable Roc Loc 5.5 MIPS system that combines fit and positioning adjustments while integrating with MIPS technology for an added measure of protection in the event of an angled impact. The outer Hardbody shell extends to the inside of the helmet, and is molded from a tough polycarbonate that's fused permanently to the EPS foam liner using our In-Mold process to enhance durability and ventilation without excess bulk. Specs: - Impact Management: Integrated MIPS - Construction: In-mold construction, Four-piece Polycarbonate Interlocking Hardbody Shell, Full Hardbody Wrap - Ventilation:Wind tunnel vents with internal channeling - Fit System: Roc Loc 5.5 MIPS - Weight: 300g (Size Medium CPSC); 280g (Size Medium CE) - Certification: Complies with the US CPSC Safety Standard for bicycle helmet for persons age 5 and older E.U.: CE EN1078

Premium Style for Recreational MTB How do you improve on the #1, top-selling helmet on Earth? Carefully, and with meticulous attention to detail. This updated helmet boasts a revised silhouette, redesigned integration of the Mips® Brain Protection System, and improved cooling power. Whether you're headed for off-road adventure or just a relaxing spin, the Fixture™ Mips II offers the right combination of value, performance, and classic design that can't be beat. With a strong and striking style, quick-dry padding, a simple and durable Roc Loc® Sport fit system, and reflective rear decals, every rider demand has been addressed. After all these updates and improvements, you'd be forgiven for thinking we doubled the price of this second-generation Fixture, but the Fixture Mips II retains its position as the value leader. - INTEGRATED MIPS® BRAIN PROTECTION SYSTEM — All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated Mips®-equipped helmets is to reduce rotational forces while enhancing fit and comfort by combining the Mips slip plane with the helmet's adjustable fit system. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. Learn more about Mips in the video above. - IN-MOLD CONSTRUCTION — In-Mold Construction fuses a tough polycarbonate outer shell with the helmet's impact-absorbing foam liner. The fusion process allows for better ventilation systems, making in-mold helmets lighter and cooler than traditional helmets. - ROC LOC® SPORT FIT SYSTEM — The Roc Loc® Sport fit system offers easy one-handed operation with a 7cm adjustment range. Its confident clicking feel and sound lets riders know that the helmet is adjusting to a comfortable fit. With comfort similar Roc Loc 5 and ponytail compatibility, the new Roc Loc Sport fit system brings premium function to sport level helmets. - REFLECTIVE DETAILS — Reflective Details enhance visibility at nighttime or in low-light conditions when illuminated by a light source, such as headlights, by returning the light back to the source and reaching the driver's eye. - UNIVERSAL FIT™ SIZING — Our Universal Fit helmets are sculpted to look good and fit great for almost anyone on the first try. By developing proprietary shell sizes based on specific customer groups, and combining them with an easily-adjustable fit system, it's easy for you get the right fit, straight out of the box, without the hassle or expense of trying multiple sizes. - Quick-dry padding Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older

The Radix MIPS W helmet combines rugged style and durability to meet the demands of core trail riders, with the coverage, light weight, and ventilation riders need to ride comfortably and confidently all day. The Women's Radix MIPS W helmet is for the rugged adventurer who appreciates a perfect fit, the sun staying out of their eyes, and plenty of ventilation. The highly adjustable Roc Loc 5.5 MIPS system allows you to customize fit and feel for enhanced stability and long-range comfort while providing an added measure of protection from rotational forces in the event of an angled impact. The P.O.V. visor offers 15 degrees of adjustment, and the tough polycarbonate outer shell is fused permanently to the EPS foam liner using our In-Mold construction process, to enhance durability and ventilation without excess bulk. Specs: - Integrated MIPS - Construction: In-mold polycarbonate shell with EPS liner - Ventilation: Wind tunnel vents with internal channeling - Fit System: Roc Loc 5.5 MIPS - Weight: 316g (Size Medium CPSC); 300g (Size Medium CE) - Certification: Complies with the US CPSC Safety Standard for bicycle helmet for persons age 5 and older, E.U.: CE EN1078 - Highlights: P.O.V. Adjustable visor, Quick dry padding, Slimline webbing

- In-molded construction - TransTextura moisture-wicking, anti-odor inner padding - MIPS Protection - Optional visor on Path MTB helmet Sizing: - Small/Medium = 49 – 57cm - Medium/Large = 53 – 61cm

- In-molded construction - TransTextura moisture-wicking, anti-odor inner padding - MIPS Protection Sizing: - Small/Medium = 49 – 57cm - Medium/Large = 53 – 61cm

RISE ABOVE. With cutting-edge design and maximum ventilation, Rev is one of the official helmets of Team Giant-Sunweb. From hors categorie climbs to World Cup cyclocross racing, it’s the ultimate choice for superior fit, comfort and protection. FEATURES - 21-vent configuration for optimal airflow and top-of-the-head ventilation - LiteForm webbing for enhanced comfort and performance - Internal Structural Shell (ISS) for strength at a reduced weight - Giant CINCH+ fit system for simple and easy head-hugging comfort - Proprietary TransTextura PLUS anti-microbial fast-wicking pad technology - MIPS is a low friction layer between the head and the helmet that provides added protection with respect to angled impacts SPECIFICATIONS - Western: S (51-55cm);M (55-59cm);L (59-63cm) - Weight: 280g (size M, CPSC/CE) - Certifications: CPSC/CE;AS/NZS

TACKLE NEW TRAILS. With authentic off-road style and a comfortable fit, this helmet delivers it all for aspiring adventurers. FEATURES - We've got you covered! 1 year crash replacement program. - Created for the off-road enthusiast seeking performance features but with budget in mind - Trail-specific design with extended rear coverage - Airflow ventilation system with deep internal airflow channels for cooling - Cinch Pro fit system offers optimal coverage by cradling the occipital bone for full protection, support and comfort - Removable, moto-style extended protection side-snap visor - Integrated magnetic mount for the Numen+ Link taillight and GoPro compatible mounting surface - MIPS mimics the brain's own protection system by adding a low friction layer between the head and the helmet reducing rotational violence that causes strain to the brain at angled impacts SPECIFICATIONS - Western: S (51-55cm);M (55-59cm);L (59-63cm) - Weight: 365g (size M) - Certifications: CPSC/CE;AS/NZS)

Tackle new trails. With authentic off-road style and a comfortable fit, this new helmet delivers it all for aspiring adventurers. Features - Created for the off-road enthusiast seeking performance features but with budget in mind - Trail-specific design with extended rear coverage - AirFlow ventilation system with deep internal AirFlow channels for cooling - Cinch Pro fit system offers optimal coverage by cradling the occipital bone for full protection, support and comfort - Removable, moto-style extended protection side-snap visor - Integrated magnetic mount for the Numen+ Link taillight and GoPro compatible mounting surface - MIPS mimics the brain's own protection system by adding a low friction layer between the head and the helmet, reducing rotational violence that causes strain to the brain at angled impacts

The FeatherWeight features In-Mold technology to make a custom shape and fit utilizing a thin outer shell that covers and protects high-density EPS foam. - High density EPS in-mold construction - Tested and certified for CPSC and EN 1078 standards for bicycle use - Two sets of padding included for custom fitting - Crow rivets and 10 flow-vents to keep cool - Small/Medium = 50 – 56cm - Large/X-Large = 58 – 61cm

The Shadow Classic Helmet is constructed with a high-impact ABS hard shell with a light EPS core liner for even distribution of force upon impact. - ABS Hardshell construction with light EPS core liner - Includes two sets of padding for a custom fit - CE and CPSE certified - Shadow Crow Head rivets and Classic woven label - X-Small = 46 – 50cm - Small/Medium = 50 – 56cm - Large/X-Large = 56 – 61cm - XX-Large = 61 – 65cm

The Shadow Classic Helmet is constructed with a high-impact ABS hard shell with a light EPS core liner for even distribution of force upon impact. Two sets of our breathable foam pads ensure a custom fit for each rider's personal needs. Our 10 vent shell was designed to be lightweight and offer the rider great ventilation without compromising the helmet structure and durability. With such attention to detail, it's no surprise that the Classic helmets surpassed all EN and CPSC standards while being vigorously laboratory-tested to the highest possible degree. - ABS Hardshell construction with light EPS core liner - Shadow Crow Head rivets and Classic woven label - Adult sizes include 2 sets of padding for a custom fit - Surpasses all CE & CPSE Standards - Weight: 400 grams - Sizes: XS (46-50 cm), SM/MD (50-56 cm), LG/XL (56-61 cm), 2XL (61 65cm)

- Lumos Kickstart is the world's first smart bike helmet that beautifully integrates lights, brake signal, turn signals, and helmet into a single cohesive whole. - Lumos meets the rigorous safety standards of the CPSC (USA), ASTM F1447 (Canada) and EN1078 (Europe). - Features 48 individual LEDs in the front and back to ensure your visibility on the road. Be seen, be safe! - Rechargeable battery with charging cable included - Automatic warning lights when braking - Now compatible with: Apple Watch / Strava / Apple Health - E-Bike certified - 6 hours battery life on blinking mode, and 3 hours on solid mode - Charging time of approx. 2 hours - Smartphone app - Wireless remote to control turn signal - Fits 21.3" – 24" (54 – 61cm)

- COB LED Technology: it's a more compact footprint while delivering a higher intensity of light, meaning you'll be seen from farther away and gives the lights a more uniform look - The helmet will be equipped with 98 COB LEDs in total - Front Light (30 COB LED diodes) - Rear Lights with Turn Signals (34 red COB LED diodes, 34 orange COB LED diodes) - 1100mAh rechargeable battery providing up to 10 hours with the lights set on maximum brightness - USB-C Charging Connection (Chargeable with a 5V—5.2V & 0.5A charger) - Remote included for turn signal - Option to buy a Lumos Remote to activate Automated Brake Lights. (The Remote Lite included with Ultra doesn't come with an accelerometer and can only be used to activate turn signals) - Lumos Companion App: Customize your light flashing patterns, check your battery life, track your activity, and sync with Strava and Apple Health - Maximum Venting - Fits: 21.3 – 24" (54 – 61cm)

- COB LED Technology: it's a more compact footprint while delivering a higher intensity of light, meaning you'll be seen from further away and gives the lights a more uniform look - The helmet will be equipped with 98 COB LEDs in total - Front Light (30 COB LED diodes) - Rear Lights with Turn Signals (34 red COB LED diodes, 34 orange COB LED diodes) - 1100mAh rechargeable battery providing up to 10 hours with the lights set on maximum brightness - USB-C Charging Connection (Chargeable with a 5V—5.2V & 0.5A charger) - Remote included for turn Signal - Option to buy a Lumos Remote to activate Automated Brake Lights. (The Remote Lite included with Ultra doesn't come with an accelerometer and can only be used to activate turn signals) - Lumos Companion App: Customize your light flashing patterns, check your battery life, track your activity, and sync with Strava and Apple Health - Maximum Venting - MIPS technology Sizing: - Small: 51 – 55cm / 20 – 21.6" - Medium/Large: 54 – 61cm / 21.3 – 24" - X-Large: 61 – 65cm / 24 – 25.6"

- COB LED Technology: it's more compact footprint whilst delivering a higher intensity of light meaning you'll be seen from further away and gives the lights a more uniform look - The helmet will be equipped with 98 COB LEDs in total - Front Light (30 COB LED diodes) - Rear Lights with Turn Signals (34 red COB LED diodes, 34 orange COB LED diodes) - 1100mAh rechargeable battery providing up to 10 hours with the lights set on maximum brightness - USB-C Charging Connection (Chargeable with a 5V—5.2V & 0.5A charger) - Lumos Companion App: Customize your light flashing patterns, check your battery life, track your activity and sync with Strava and Apple Health - Maximum Venting - MIPS technology - Ultra Plus MIPS includes: MIPS, Bugnet, Visor, and Remote Pro

When trail riding moves up to the next level and you are challenging mountains. The mountain will call you at one point or another, so be prepared! A universal sunglasses dock lets you safely dock your sunglasses under the visor when not in use, protected from scratches and unwanted impacts. The adjustable visor opens up enough to place your goggles underneath, so you don’t have to constantly remove them. You will also love the convenience of the Fidlock buckle system. Leatt helmets feature 360 ° Turbine Technology that reduces both rotation acceleration and concussion level impact energy to your head and brain! Do not be afraid to push your limits. Gear up and be prepared for whatever is waiting along the trail. Details: - Lightweight Polymer shell - Sunglasses dock port for easy, secure storage - Fidlock magnetic closure system - 360° Turbine Technology - Reduced peak brain acceleration by up to 30% at impact speeds associated with concussion - Reduces peak brain rotational acceleration by up to 40% - Adjustable visor with breakaway function for rotational impact force reduction - Maximized ventilation with 18 vents. Optimized for riding and effective even at low speeds - Moisture-wicking, breathable, anti-odor, and washable inner liner - In-molded EPS + EP0 impact foam for superior energy absorption - Weight: From 430g (0.95 lbs) - Certified and tested: AS/NZS 2063:2008, EN1078, CPSC 1203, ASTM F1952-15

The perfect lightweight helmet offers great head coverage for ultimate protection. This is a lot of helmet for the price. It offers extensive protection around the head and deeper rear coverage. It also includes Leatt’s 360 Turbine technology, which is proven to reduce the risk of concussion by up to 30% and rotation forces upon impact by 40%. With 14 vents and Maxiflow air channels, the lightweight construction also offers great ventilation for those hot days. Details: - Polymer Compound shell in three sizes - MaxiFlow impact foam air channels are effective even at low speed - 360° Turbine Technology - Reduced peak brain acceleration by up to 30% at impact speeds associated with concussion - Reduces peak brain rotational acceleration by up to 40% - Extended rear coverage for added protection - Adjustable visor with breakaway function for rotational impact force reduction - In-molded impact foam for great energy absorption - Maximized ventilation with 14 vents effective even at low speeds - Moisture-wicking, breathable, and washable inner liner - Weight: from 320g (0,70 lbs) - Certified and tested: AS/NZS 2063:2008, EN1078, CPSC 1203

The perfect lightweight helmet offers great head coverage for ultimate protection. This is a lot of helmets for the price. It offers extensive protection around the head and deeper rear coverage. It also includes Leatt’s 360 Turbine technology, which is proven to reduce the risk of concussion by up to 30% and rotation forces upon impact by 40%. With 14 vents and Maxiflow air channels, the lightweight construction also offers great ventilation for those hot days. Details: - Polymer Compound shell in three sizes - MaxiFlow impact foam air channels are effective even at low speed - 360° Turbine Technology - Reduced peak brain acceleration by up to 30% at impact speeds associated with concussion - Reduces peak brain rotational acceleration by up to 40% - Extended rear coverage for added protection - Adjustable visor with breakaway function for rotational impact force reduction - In-molded impact foam for great energy absorption - Maximized ventilation with 14 vents effective even at low speeds - Moisture-wicking, breathable, and washable inner liner - Weight: from 320g (0,70 lbs) - Certified and tested: AS/NZS 2063:2008, EN1078, CPSC 1203

All-day comfort with premium head and brain protection. The Leatt All-MTN 2.0 helmet has a lower rear shell, than its trail brother the Trail 2.0 helmet. This rear coverage offers greater protection for faster, more aggressive riders. Our helmets feature 360 ° Turbine Technology, the helmet is lined with turbines that are 360 °moving discs constructed from an energy-absorbing shape and material, this tech has two exclusive advantages, namely the reduction of rotational acceleration to the head and brain and the absorption of energy upon impact at concussion level. The helmet features low-speed ventilation ports and a Fidlock® magnetic buckle for easy fitting. You can conveniently store your sunglasses at the rear of the helmet as well. The visor is adjustable and breaks away upon impact for extra rotational impact force reduction. If you are looking for a multifunctional, lightweight helmet, then the 2.0 All MTN helmet is the helmet you want. Details: - Lightweight 2-piece polymer shell in three sizes - Sunglasses dock port for easy, secure storage - Fidlock magnetic closure system - 360° Turbine Technology - Reduced peak brain acceleration by up to 30% at impact speeds associated with concussion - Reduces peak brain rotational acceleration by up to 40% - Adjustable visor with breakaway function for rotational impact force reduction - In-molded impact foam for superior energy absorption - Maximized ventilation with 20 vents effective even at low speeds - Moisture-wicking, breathable, anti-odor, and washable inner liner - Premium bottom trim for a quality finish - Weight: from 375g (0.83 lbs) - Certified and tested: AS/NZS 2063:2008, EN1078, CPSC 1203

All-day comfort with superior head and brain protection. Made from a lightweight polymer shell, the Enduro 3.0 helmet features a Powerbridge construction for greater shell strength. The Enduro 3.0 helmet also features 360 ° Turbine Technology. These small blue 360-degree moving discs are constructed from an energy-absorbing shape and material. This tech has two exclusive advantages, namely the reduction of rotational acceleration to the head and brain and the absorption of energy upon impact at the concussion level. The helmet features low-speed ventilation ports and a Fidlock® magnetic buckle for easy fitting. You can conveniently store your sunglasses at the rear of the helmet as well. The visor is adjustable and breaks away upon impact for extra rotational impact force reduction. If you are looking for a multifunctional, lightweight helmet, then the 3.0 All MTN helmet is the helmet you want. Details: - Lightweight 4-piece polymer shell in three sizes - Powerbridge top shell construction for greater load distribution - Sunglasses dock port for easy, secure storage - Fidlock magnetic closure system - 360° Turbine Technology - Reduced peak brain acceleration by up to 30% at impact speeds associated with concussion - Reduces peak brain rotational acceleration by up to 40% - Adjustable visor with breakaway function for rotational impact force reduction - In-molded impact foam for superior energy absorption - Maximized ventilation with 20 vents effective even at low speeds - Moisture-wicking, breathable, anti-odor, and washable inner liner - Premium bottom trim for a quality finish - Weight: from 350g (0.78 lbs) - Certified and tested: AS/NZS 2063:2008, EN1078, CPSC 1203

The most versatile helmet you can buy! The Enduro 3.0 helmet offers three different levels of protection. Wear the half shell for those light trail days or attached the over-ear coverage for slightly more aggressive trails. For total protection clip in the chin bar for full-face protection when you need it! Made from a lightweight polymer shell, the Enduro 3.0 helmet features a Powerbridge construction for greater shell strength. The Enduro 3.0 helmet also features 360 ° Turbine Technology. These small blue 360-moving discs are constructed from an energy-absorbing shape and material. This tech has two exclusive advantages, namely the reduction of rotational acceleration to the head and brain and the absorption of energy upon impact at the concussion level. The micro adjuster at the back ensures the perfect fit. There is also a sunglasses docking port to stash your sunnies when you don’t need them. The visor is adjustable and has a breakaway function for extra rotational impact force reduction. Choose your style and be ready for any trail with the 3-in-1 enduro helmet. Details: - Lightweight polymer shell in three sizes - Powerbridge top shell construction for greater load distribution - 3-IN-1 helmet design: 1) Half-shell open-face helmet 2) Removable chin bar with easy push-button system 3) Removable over-the-ear guards with an easy push-button system - Sunglasses dock port for easy, secure storage. - Fidlock magnetic closure system - 360° Turbine Technology - Reduced peak brain acceleration by up to 30% at impact speeds associated with - concussion - Reduces peak brain rotational acceleration by up to 40% - Adjustable visor with breakaway function for rotational impact force reduction - In-molded impact foam for superior energy absorption - Maximized ventilation with 20 vents effective even at low speeds - Moisture-wicking, breathable, anti-odor, and washable inner liner - Weight: From 700g (1.54 lbs). Without chin bar: from 360g (0.79 lbs) - Certified and tested: AS/NZS 2063:2008, EN1078, CPSC 1203, ASTM F1952–10

Renowned for its ventilation and comfort, this enduro MTB helmet has been advanced from the much loved 4.0 full-face helmet. Packed with unique features there is not another helmet on the market like it! A removable mouthpiece in the chin bar increases ventilation or can be installed to protect you when riding in poor weather conditions. A universal sunglasses dock lets you safely dock your sunglasses under the visor when not in use, protected from scratches and unwanted impacts. The adjustable visor opens up enough to place your goggles underneath, so you don’t have to constantly remove them. This fully ASTM DH-certified helmet is the go-to helmet for Enduro riders. Uphill or downhill, E-bike or trail - you name it, the Leatt 4.0 Enduro helmet has you covered. The full-face design with a removable chin bar with an incredibly strong magnesium lock offers outstanding ventilation and its convenient Fidlock® buckle makes life just peachy! We all crash. Sometimes hard, and sometimes even harder! Leatt helmets feature 360 ° Turbine Technology that reduces both rotation acceleration and concussion level impact energy to your head and brain! Do not be afraid to push your limits. Details: - DH-certified lightweight Polymer shell - Removable chin bar with NEW easy-fit attachment system - Sunglasses dock port for easy, secure storage - Fidlock magnetic closure system - 360° Turbine Technology - Reduced peak brain acceleration by up to 30% at impact speeds associated with concussion - Reduces peak brain rotational acceleration by up to 40% - Maximized ventilation with 18 vents. Optimized for riding and effective even at low speeds - Moisture-wicking, breathable, anti-odor, and washable inner liner - Optimal neck brace compatibility - Adjustable visor with breakaway function for rotational impact force reduction - In-molded EPS + EP0 impact foam for superior energy absorption - Weight: From 810g (1.79 lbs) - Certified and tested: AS/NZS 2063:2008, ASTM F1952–10, EN1078, CPSC 1203

The Leatt MTB Gravity 1.0 is a full-face helmet with solid protection. The focus of this helmet is premium safety and great value. Featuring 360 ° Turbine Technology, the helmet is lined with turbines which are 360 °moving discs constructed from an energy-absorbing shape and material, this tech has two exclusive advantages, namely the reduction of rotational acceleration to the head and brain and the absorption of energy upon impact at concussion level. Air vents are not covered, which makes this helmet well-ventilated. Ideal for warmer downhill or bike park days. Get full face head and brain protection at an amazing price. Details: - Downhill-certified ASTM polymer shell in three sizes - Great ventilation - 360° Turbine Technology - Reduced peak brain acceleration by up to 30% at impact speeds associated with concussion - Reduces peak brain rotational acceleration by up to 40% breakaway visor function for additional rotational impact force reduction - Double D ring chin strap - Impact foam for superior energy absorption - Washable inner liner - Optimal neck brace compatibility - Weight: From 960 ± 50g (2.12 lbs) - Certified and tested: AS/NZS 2063:2008, ASTM F1952–10, EN1078, CPSC 1203

The Leatt Gravity 2.0 helmet is full-face, head, and brain protection. The focus of this helmet is superior safety and great value. Featuring 360 ° Turbine Technology, the helmet is lined with turbines which are 360 °moving discs constructed from an energy-absorbing shape and material, this tech has two exclusive advantages, namely the reduction of rotational acceleration to the head and brain and the absorption of energy upon impact at concussion level. This helmet comes with a premium liner for long-lasting comfort and moisture-wicking properties. The vents are also covered with a stainless steel mesh. This offers more protection from stones, dirt, or bad weather. Get supreme full-face head and brain protection at an amazing price. Description: - Downhill-certified ASTM polymer shell in three sizes - Stainless steel mesh vents - 360° Turbine Technology - Reduced peak brain acceleration by up to 30% at impact speeds associated with - concussion - Reduces peak brain rotational acceleration by up to 40% breakaway visor function for additional rotational impact force reduction - High-quality inner liner for all comfort in hot and cool weather climates - Great ventilation - Double D ring chin strap - Impact foam for superior energy absorption - Premium washable inner liner for all-day comfort - Optimal neck brace compatibility - Weight: From 960 ± 50g (2.12 lbs) - Certified and tested: AS/NZS 2063:2008, ASTM F1952–10, EN1078, CPSC1203

Renowned for its ventilation and comfort, this all-purpose MTB helmet is fitted with 360 Turbine technology, offering great protection at a fair price. This fully ASTM DH-certified helmet is the go-to helmet for Enduro and bike park riders. Uphill, downhill, upside down, E-bike, or trail - you name it, the Gravity 4.0 has you covered. The full-face design with a removable mouthpiece offers outstanding ventilation and its convenient Fidlock® buckle makes life just peachy! We all crash. Sometimes hard, and sometimes even harder! There is a solution to minimize the risk of a head and brain injury, however – go and get the best helmet you can find that reduces both rotation and impact energy to your head and brain! Our helmets feature 360 ° Turbine Technology, the helmet is lined with turbines that are 360 °moving discs constructed from an energy-absorbing shape and material, this tech has two exclusive advantages, namely the reduction of rotational acceleration to the head and brain and the absorption of energy upon impact at concussion level. So, the next time you crash, see to it that you are protected by the best! Details: - DH-certified lightweight Polymer shell in two sizes - Maximized ventilation with 22 vents - Removable mouthpiece ventilation cover - Fidlock magnetic closure system - 360° Turbine Technology - Reduced peak brain acceleration by up to 30% at impact speeds associated with concussion - Reduces peak brain rotational acceleration by up to 40% - Dri-Lex® moisture-wicking, breathable, anti-odor, and washable inner liner - Optimal neck brace compatibility - Visor with breakaway function for rotational reduction in a crash - In-molded EPS + EPO impact foam for superior energy absorption - Weight: From 850g (1.87 lbs) - Certified and tested: AS/NZS 2063:2008, ASTM F1952–10, EN1078, CPSC1203