The crankset is the heart of your bicycle and where you’ll find the SRAM RED Quarq power meter. The sole job of the crankset is to convert the effort from both legs to forward motion. It is the perfect place to measure power. This power meter works for every discipline: Road, triathlon, time trial, and cyclo-cross. The chainrings are replaceable should your bike, discipline, or ability change. - A direct force power meter that measures total power output from both legs with +/-1.5% accuracy - Works for every discipline: Road, triathlon, time trial, and cyclo-cross - No compromises on materials, shifting, wheels, or pedal choice - Proven by pro teams and athletes throughout the world – Cobbled Classics, Giro d’Italia, Tour de France, Vuelta a España, World Championships - Number 1 at the Ironman World Championship for the last three years - Uses a hidden bolt to mount the chainrings – compatible SRAM chainrings ensure the derailment pin lines up behind the crank arm - 10K – programmed with over 10,000 data points to eliminate temperature effects on power measurement - AxCad – A multi-axis accelerometer switches the power meter on and measures cadence, simplifying installation and operation - Breakthrough Materials – Exogram hollow carbon fiber crank arms – the lightest, strongest crank arms SRAM makes – minimize weight and maximize speed [ELSA RS, ELSA R and SRAM RED] - Easy to use (and reuse) – LED indicator and visible ANT+ ID - The replaceable CR2032 battery never leaves you without power - Manual and automatic zeroing make it truly set and forget - Built to Last – IPX7 waterproof rating, 2-year warranty, free firmware updates, and acclaimed international support - Moves with you from bike to bike - With Quarq's free Qalvin app – available for Windows, Mac, iOS and Android – you can set the zero offset, check battery voltage, run diagnostics, and perform firmware updates for free Arm Material: Carbon arms, Machined alloy spider Weight: 778 grams (GXP 172.5mm 53x39 BB not included) * Chainrings and BB sold separately
The SRAM XX1 Eagle Power Meter unites Quarq's DZero power meter platform with carbon tuned crank arms for robust, intuitive power measurement in the lightest ever chassis. The DZero platform embodies 10 years of Quarq's technology advances and adds new features such as dual Bluetooth low energy and ANT+ wireless data transfer, and the Qalvin BLE app. The companion X-SYNC 2 chainrings are designed specifically for Eagle chains and drivetrains. - BB Included: No - Chainring BCD: 104 - Chainrings sold separately
Make the most of your Shimano Dura-Ace R9100 groupset by upgrading to Quarq’s DFour91 power meter, which embodies all the advances of the next-generation DZero platform. Designed especially for Shimano's Dura-Ace R9100 series, the Quarq DFour91 Power Meter brings Quarq's next-generation DZero platform to Shimano's latest groupset. Compatible with Ultegra R8000 chainrings. DFour91 embodies 10 years of Quarq advances in power meter technology, plus new features such as dual Bluetooth Low Energy and ANT+ wireless data transfer, revised circuitry, a new strain gauge design and the Qalvin BLE app. The DFour91 power meter is a bolt-on upgrade, pairing with the 11-speed Dura-Ace R9100 or Ultegra R8000 chainrings. Get the chassis, which includes Quarq's lightweight, sturdy Exogram carbon crank arms. The GXP and BB30 versions work with every bottom bracket shell, including BBright and BB386EVO. If you already have a power meter using the 8-bolt interface, upgrade with the DFour91 spider. Features & Benefits: - Exogram carbon crank arms - Bluetooth low energy technology and ANT+ wireless data transfer - AxCad – no cadence magnet required - 10K Temperature Compensation - Battery – CR2032, 200-hour battery life, change without tools - Power Balance - OmniCal – swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy – within 1.5%, measuring both legs - Free firmware upgrades with the Qalvin app Essential Details: - Designed for Dura-Ace R9100 chainrings. Compatible with Ultegra R8000 chainrings. - Must be paired with a compatible SRAM bottom bracket. - BB30 versions ship with the spacers and wave washer required for BB386EVO installation. - 8-bolt power meter owners can upgrade using the DFour91 Power Meter Spider.
Pioneer's power meters are simply some of the best power-monitoring systems on the planet, and the SGX-CA500 computer is your chance to get the most out of your power meter and have a world-class data display. Pioneer has created the first, and only, power meter that measures power output and pedaling stroke efficiency for each individual leg, and the SGX-CA500 lets you analyze this data in real time. A few quick swipes give you access to your state-of-the-art ride data, and intuitive controls allow for scrolling, zooming, and screen customization to let you see what you want, when you want it. The 1.87-inch LCD screen makes it incredibly easy to see critical data, even if you are on the rivet up the final climb. As an added bonus, users of Shimano’s Di2 electronic road bicycle shifting system can now utilize the SGX-CA500 to track gearing and system status as they ride. - Delivers high functionality for practical situations, in a small, lightweight (75 g) package - Visualizes pedaling state and efficiency through graphical displays of force vectors (when used together with a pedaling monitor sensor) - Enables new modes of training focused on pedaling skill development - Displays over 100 data types, such as power, cadence, speed, and incline, all in real time - Easy, intuitive touch-panel operation, even when wearing full-finger gloves - Upload data to Cyclo-Sphere, our online data analysis service, via USB or Wi-Fi connection (Wi-Fi Internet connection required) - Weight: About 75 g - Dimensions: 58 mm (W) x 58 mm (H) x 19 mm (D) (without projection parts) - Connector: microUSB - Water-resistance: This device has a water-resistance rating of IPX-6/IPX-7 - Communications system (sensors): ANT+ - Communications method (network): Wi-Fi - Positioning system (latitude/longitude): GPS - Positioning system (altitude): Atmospheric pressure sensor - Display: 160x128 pixel, horizontal 1.87-inch outdoor type, Black and white touch panel (resistive touch display) - Built-in flash memory: 4 GB (user available capacity 3 GB) - Guaranteed operational temperature range: -10 to 50°C - Charging temperature: 0 to 45°C - Power supply voltage: DC 5V - Battery type: Lithium-ion battery - Battery operating time: Approximately 12 hours (the battery operating time may decrease depending on the operating conditions) - Charging time: Approximately 4 hours (Power off or normal charging) - Accessories: Bracket, USB cable, Strap, Quick Start Guide, Warranty card, Important Information for the User - Specifications and design are subject to change without notice.
Pioneer's Shimano Dura Ace 9000 Power Meter is a revolutionary power meter that attaches stealthily to the left crankarm. The Dura Ace 9000 left crank arm meter allows every rider power-based (also called watt-based) training performance, allowing you to fine-tune your pedaling to find race-winning form without breaking the bank. With advanced technology accurate to +/- 2%, ANT+ transmitting, active temperature compensation, and a mere 22 grams of weight, the Pioneer power meter is perfect for any cyclist. Additionally, installation is fast, simple, and clean with zero wires, magnets, or zip ties. If you find yourself addicted to the data and crave more, upgrade kits that retroactively add drive-side power are available (sold separately).
Benefit from tracking the most interesting, accurate, valuable, motivating and fun information while you're riding your Kinetic trainer with their inRide Watt Meter. It uses Bluetooth communication technology to pair a power sensor pod with Kinetic's inRide iPhone app so you can track your wattage with any Kinetic fluid trainer (smartphones and trainers sold separately). Tailor your workouts to meet your riding goals by logging your entire workout history, and even email your data to a coach for analysis, training, and planning. With the easy-to-install sensor and quick-download app, you'll be rolling and logging data in no time.
Dual-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3 pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3 has the sensors housed right in the pedals, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Measures total power, left/right balance, cadence and cycling dynamics - Sleek design provides greater cornering clearance and improved stack height - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours - Weight: 316 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/55 mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
Single-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3S pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3S has a sensor housed in the left pedal, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Reports cadence and total power (watts) - Easily upgrades to dual-sensing system - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x2) - Battery life: up to 120 hours - Weight: 324 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/ 55mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
The Kéo Power Dual Mode is the third generation of LOOK power meter pedals. The measurements of pedaling effort are provided by eight strain gauges installed in the axle of the pedal. This ensures a reliable power measurement because it is calculated directly where the force is applied by the rider. With the Essential version, data is only measured from the left pedal. In addition to the power and cadence reading, the Kéo Power measures your strength, and pedaling efficiency (dead spots/regularity). Compatible with Bluetooth and ANT+ devices.
The CycleOps ANT+ Speed or Cadence Sensor accurately tracks your speed and cadence and is used along with a power meter or with an ANT+-compatible cycling computer (power meters and ANT+ computers sold separately). This unit easily attaches on the frame next to your left crankarm and rear wheel to monitor and display your cadence or speed on your cycling computer of choice.
Train smarter to get fitter and stronger with Look's Keo Power pedal system. It lets you measure and track your power (watts), cadence, and even your left/right power balance to maximize your pedaling efficiency. The pedals boast wide contact areas for easy entry/exit and excellent efficiency so all your energy goes into forward motion. The Keo also have light carbon bodies, durable sealed bearings, and stainless-steel contact plates to minimize cleat wear. Perhaps best of all, unlike other power systems Keo Power can easily be moved between your training, race, and time trial bikes for maximum versatility. A pair of Kéo Grip cleats, screws, base station, and tools are included.
The ANT+ Micro USB adapter allows on-the-go devices (OTG), such as your Android phone or tablet, to connect to an ANT+ USB stick. Android OTG compatible devices require ANT+ Radio Service and ANT+ USB Service to be installed from the Google Play store. These services allow the adapter to work correctly with an ANT+ USB stick.
Page 1 of 1