Parts & Accessories

- Converts Schrader rims to Presta - Rubber - Sold individually

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt

Replacement Axle nuts for three speed Sturmey Archer hubs.

- Shell: 8mm flanged axle nut - Flanged

- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body

- Replacement adjustable nut for three-speed internal hubs.

- Steel end nut for QR skewers

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

• Rim strips for 20-inch fat bike rims • 80mm wide

- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body

Rubber rim strips for 24-inch diameter fatbike rims. - Sold individually

Replace the loop that goes around your left chainstay to secure your coaster brake arm with this Sunlite replacement part. It's made of full stainless steel, and it includes a nylock nut, washer, and bolt.

- Rim strips for 26-inch fat bike rims

Replacement parts for Micro C-Drive Hubs. - Supplier Part: Replacement #16 Clutch Ring

Replacement parts for Micro C-Drive Hubs. - Supplier Part: Replacement #20 Cone Drive

- Replacement Presta valves cores - Fits tubes with removable Presta cores and tubeless valves - Sold in pairs

Replacement clear plastic spoke guard.

- Eady to install - Spoke mounted - 2 per set

- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body

CNC machined from 6061-T6 aluminum alloy, Box One Schrader Valve Caps add a touch of style to any bike. Available in anodized red, blue, and black with laser-etched Box logos.

CNC machined from 6061-T6 aluminum alloy, Box One™ Presta Valve Caps add a touch of style to any bike. Available in anodized red, blue, and black with laser-etched Box logos. Material 6061-T6 Aluminum Weight 0.25 grams / 0.008 ounces

- Flanged 15mm axle nuts - Durable chromoly construction - Spacing / Axle: B/O

- Flanged 15mm axle nuts - Durable chromoly construction - Spacing / Axle: B/O

Origin-8's Pro Pulsion Rim Strips are made from a super-durable, environmentally friendly PVC material.

Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.

Replacement axles for MX-2000 hubs. Size: 14 x 100 x 165mm - Supplier Part: KT-M18F - MPN: 370666 - Front/Rear: Front - Diameter: 14mm - OLD: 100mm Size: 14 x 110 x 180mm - Supplier Part: KT-389R - MPN: 370668 - Front/Rear: Rear - Diameter: 14mm - OLD: 110mm Size: 3/8-inch x 100 x 165mm - Supplier Part: KT-M17F - MPN: 370667 - Front/Rear: Front - Diameter: 3/8-inch - OLD: 100mm Size: 3/8-inch x 110 x 180mm - Supplier Part: KT-M88R - MPN: 370682 - Front/Rear: Rear - Diameter: 14mm slotted for 3/8-inch - OLD: 110mm

You need rim tape to keep your tubes from blowing through the spoke holes, especially when landing big airs. WeThePeople's got your back, though. If your's is questionable, you better replace it with this WTP Nylon Rim Tape, a perfect fit with Logic Rims. - Strong - Lightweight - Tube-proof

- Plastic spoke covers in a variety of colors - 300mm cut to fit length - 36 pieces - enough for one wheel - Increases visibility and demands attention

- Fits all freewheel hubs - Will not fit Cassette hubs - Type: STD Plastic - Color: Clear

- Replacement steel quick release skewers

- Replacement rear skewer - Spacing: 135mm - Material: Steel

Replacement indicator chain for three speed Sturmey Archer hubs.

This lightweight, high-pressure rim tape offers great protection against spoke hole flats and is easy to install. This Italian-made tape is light and thin, so it will not inhibit tire fitting. Nylon elastic material is used to ensure a snug fit without movement.

Origin8 spring and pawl kit for MT-3100 series rear hubs

- High-quality fat bike rim strips - Super durable PVC material

• Replacement aluminum quick release skewers

• Replacement aluminum quick release skewers

WTP's Helix hub guards are designed to work on The Helixline of hubs, replacing the cones for a perfect fit without having to spread your dropouts. - Includes heat-treated chromoly adaptor to replace hub cone nuts for a perfect fit - Rear Hub guards are compatible with Helix V1 and Helix V2 freecoaster hubs and many other "KHE" style freecoasters on the market

Replacement axle sets for use with Origin8 FB-2000 hubs Front Axle: - 3/8 x 26 x 135 x 175 Rear Axle: - 3/8 x 26 x 170 x 210

- Aluminum alloy shells resist corrosion and provide lightweight longevity - Sealed cartridge bearings offer smooth operation while resisting contaminents - 15mm Thru Axle, 6 bolt disc compatible in boost and standard configurations

- Aluminum alloy shells resist corrosion and provide lightweight longevity - Sealed cartridge bearings offer smooth operation while resisting contaminants - 20mm Thru Axle with 15mm option, 6 bolt disc compatible

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

- Small parts for the Origin8 MT-1110 Elite Series MTB Single Speed rear hub - Spacing / Axle: 1s MTB

- Variable widths - Left: 30.5mm - Center: 52mm - Right: 30.5mm - Length: 113mm - Overall: 134mm

- Variable widths - Left: 32mm - Center: 52mm - Right: 32mm - Length: 116mm - Overall: 137mm

- Variable widths - Left: 32mm - Center: 52mm - Right: 36mm - Length: 120mm - Overall: 141mm

- Variable widths - Left: 32mm - Center: 52mm - Right: 35mm - Length: 119mm - Overall: 140mm

- Variable widths - Left: 32mm - Center: 52mm - Right: 37.5mm - Length: 121.5mm - Overall: 142.5mm

- Variable widths - Left: 35mm - Center: 52mm - Right: 39mm - Length: 126mm - Overall: 147mm

- Variable widths - Left: 35mm - Center: 52mm - Right: 40.5mm - Length: 127.5mm - Overall: 148.5mm

- Variable widths - Left: 28mm - Center: 52mm - Right: 28mm - Length: 108mm - Overall: 129mm

- Type: Skewer only - Length: 220mm

- Extra long quick release for rear axle mount rack systems

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

• Replacement aluminum quick release skewers

• Replacement aluminum quick release skewers

The same spoke thread treatment used by Stan's pro wheel builders is now available to everyone. Stan's SRD Spoke Powder fills the threads of the spoke and functions as both a lubricant during assembly and a thread lock once built. Each bottle contains 24g (.8oz) which will treat approximately 300 wheels. The PTFE powder in Stan's SRD Spoke Powder acts as a barrier, keeping the metal of the nipple from bonding to the metal of the spoke and preventing spoke wind up during build or adjustment. In promoting a smoother turning nipple, the powder also ensures more accurate and consistent wheel builds, with less “ping and pop" during and after the build. The powder also fills the threads of the spoke to act as a thread lock that prevents loosening and de-tensioning and is particularly well suited for mechanically locking nipples such as Sapim's Secure Lock. - Improves tension consistency and overall build quality - Prevents spoke wind up - Offers secure thread lock between spoke and nipple - Prevents corrosion between spoke and nipple - Can be used dry or as a slurry - Works great with mechanically locking nipples

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 10mm x 26, rear hub - Compatible with 10mm x 26 axle - Cone Wrench Size: 15mm - Threads: 10mm x 26 - Diameter: 17.0mm - Length: 13.8mm - Note: O-ring / seal not included. - 1 cone per bag COMPATIBLE HUBS: - JoyTech 10mm x 26, rear hub - Taiwanese hubs with 10mm x 26 axle