Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Accessories/Parts

$59.99
- Updated design, for use with all Saris racks where bikes are secured by the top tube
- Bridges the gap from stem to seat tube, creating a virtual top tube
- Useful on ladies and specialty frames

$19.99
1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks.
- Not for use on our original NV rack.

$44.99
If you have a full-suspension bike, a small bike or any bike without a traditional top tube, you need Evo's Top Tube Adapter to attach your bike to your rack. The vinyl-coated clamp protects your bike's finish, and is coated with a rust-free powder coat. It fits up to 44mm headsets and up to 38mm seat post diameters.

$49.95
Thule's Cable Lock gives added security to your gear. This 6-foot coiled cable lock uses a Thule One-Key Cylinder (included).

$29.95
An adapter to enable safe transport of bikes with carbon frames.
Features
- The fixation pressure is distributed over a large surface area to minimize risk of frame damages
- It fits all types of frame geometries and is easily adjustable with no loose parts
- The adapter has a soft TPE rubber liner to avoid scratching the bike frame
- Only to be used with Thule bike racks with a torque limiter knob (e.g. Thule ProRide 598003, Thule EasyFold, Thule DoubleTrack 9054, Thule Raceway 9003PRO)

$99.95
This 53" long ramp, for use with Thule EasyFold XT, makes it easier to load and unload bikes, especially for taller SUV's and vans.
Features
- Quickly load and unload bikes from taller vehicles by adding this longer ramp (53") to the Thule EasyFold XT
- Easily attach the ramp to the Thule EasyFold XT wheel tray using the tongue and groove connection

$29.95
A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes.
- Fits Thule EasyFold XT bike racks

$69.95
Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely.

$69.95
Install or replace all lock cylinders on your Thule products and use the same key for all.
- Replace the locks in your Thule product in a few easy steps
- Including grip-friendly Thule Comfort key
- Set of 4 locks, all using the same key

$89.95
Install or replace all lock cylinders on your Thule products and use the same key for all.
- Replace the locks in your Thule product in a few easy steps
- Including grip-friendly Thule Comfort key
- Set of 6 locks, all using the same key

$69.95
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.

$79.95
Provides clearance for spare tires, barn doors, and tailgates when using a hitch bike carrier.
- Two-position extension, 7" and 9", clears spare tires and allows for use of platform and hanging hitch carriers
- 250 lbs weight limit carrying capacity
- Provides a 2.25" drop for improved tailgate/rear door clearance
- Bolt fixation to vehicle
- Accommodates hitch rack bike carriers with a 2" stinger (Not for towed use)

$37.50
The Swagman LOCKING THREADED HITCH PIN is specifically designed to prevent theft and wobble for Swagman's rack with threaded 1-1/4" and 2" receiver bar.
- High-security key allows for easy access with only a half-turn to unlock
- Premium chrome-plated for maximum rust protection
- Keeps Swagman hitch racks secure and stable
- Unique hidden pin cylinder for added security
- Fits 1 1/4" and 2" Universal-foot-equipped Swagman racks
- Threaded

$55.00
- High security key allows for easy access with only a half-turn to unlock
- Premium chrome plating for maximum rust protection
- 7.5 ft. long 10mm security cable with hitch pin adapter

$37.50
The Swagman LOCKING THREADED HITCH PIN is specifically designed to prevent theft and wobble for Swagman's rack with threaded 2" receiver bar.
- High-security key allows for easy access with only a half-turn to unlock
- Premium chrome-plated for maximum rust protection
- Unique hidden pin cylinder for added security
- Fits 2" only equipped racks
- Threaded

$55.00
- High security key allows for easy access with only a half-turn to unlock
- Premium chrome plated for maximum rust protection
- 8.5 ft. long 10mm security cable with hitch pin adapter

$45.00
The Swagman eBike/Cruiser Bar Adapter creates a higher top tube for your bike by attaching below the stem and seat post of your bikes. This will allow the ratcheting arms of your bike to hold step-through and heavier-weight bikes securely by grabbing onto the adapter.
- Fits: Cruiser, eBikes and Step Through bikes requiring a higher top tube for use on Platform Hitch Mount Racks.
- Max Load: 35 lbs. per bike when used on a Hanging Rack
- Telescopic bar fits multiple bike sizes
- Adapter comes equipped with vinyl-coated hangers
- User friendly quick release
- 25"-31" Maximum Width

$35.00
Whether it’s a city bike with a step-through frame or full-suspension mountain bike, some bikes just may not work well with a car rack that suspends the bike from its top-tube. Swagman's Deluxe Bar Adapter changes that. This telescopic bar hooks under the stem and around the seatpost to create a "top tube" that the rack can hold. It features vinyl-coated, quick release hooks so it's gentle on your bike and easy to use. The 19-inch Deluxe Bar expands up to 26-inches in length.

$51.50
Swagman brings you a brilliant tool for storing your hitch-mount bike rack when it's not attached to your hitch. The X Mount can be attached to any wall to create a virtual hitch. Just mount the rack like you would on your car or truck, and fold the rack up against the wall to get it out of the way. When you're not using it, the X Mount itself will even fold against the wall, creating an even lower profile.
- Fits 2-inch receiver style bike racks and 2-inch receivers with 1-1/4-inch universal adapter.
- Stores bike rack when not in use
- Folds against wall when not in use

$44.49
If you have a trunk or rear rack and a bike with an unconventional frame (such as a full-suspension or ladies bike), you probably need Sunlite's Crossbar Adapter. Vinyl-coated hooks on either end hold your bike and act as a "top tube" for easy transportation. In the middle, a quick-release telescoping adjustment ensures the Crossbar Adapter will fit almost any bike.

$51.99
- Adapts female specific and full suspension frames to be easily hung on car rack carriers
- Locking ends ensure a firm hold on the bicycles seat tube and head tube for a secure fit
- Makes transporting an unconventional frame by car rack much easier
- Extends from 21.5" to 31" eye to eye

$19.99
Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack
- Provides a clean and sleek look for your Saris Bones rack
- Upgrade your current Bones or Bones EX rack (pre-2022)
- Compatible with: Bones or Bones EX racks
- Not compatible to use with any Bones Hitch racks or SUPERBones

$49.99
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).

$24.99
Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks
- Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges.
- Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps
- Quick and easy to install and attach to your Saris Trunk Rack.
- Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks.
- Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.

$19.99
Increase rack stability for a smoother ride, this clamp system securely tightens hitch rack to receiver.
- Adds extra security to bike racks and hitch devices
- Eliminates rattling and wobbling
- Compatible with 2" receivers

$44.99
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.

$39.99
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

$199.99
The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs.
- Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Hitch Base and a wide assortment of Bike carriers and other gear carrying accessories.
- MHS Universal Hitch Base fits 1.25" and 2" receivers
- Base accommodates 1 bike tray + 1 Add-On Bike Tray, sold separately
- Convenient rear of vehicle access with tilting base activated with easy to use outboard handle
- Compact storage on vehicle as base tilts up when not in use
- Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection.
- Includes hitch lock plus additional 2 lock cores for use with MHS Accessories
- Fully assembled and easy to install on vehicle

$139.99
$199.99
30% Off
The foundation of the Saris Modular Hitch System (MHS). Modular Base works in conjunction with MHS Bike Carriers and Accessories (sold separately) to create a versatile and dependable platform rack system for all your gear hauling needs.
- Saris Modular Hitch System (MHS) is a future-proof, highly customizable modular hitch platform system consisting of a Base unit and a wide assortment of Bike carriers and other gear carrying accessories.
- MHS Hitch Base fits 2" receivers
- Base accommodates 2 bike trays + 1 Add-On Bike Tray, sold separately
- Convenient rear of vehicle access with tilting base activated with easy to use outboard handle
- Compact storage on vehicle as base tilts up when not in use
- Saris Hitch Tighter System locks and secures rack to vehicle with rock-solid hitch connection.
- Includes hitch lock plus additional 3 lock cores for use with MHS Accessories
- Fully assembled and easy to install on vehicle
Page 1 of 3
Next page