Filter By:
Parts & Accessories
$69.99
Adapts a thru axle hub bike for a Saris bike trainer.
- Trainer Thru Axle Adapter For Saris Trainers
- Thread pitch: 1.00 & 1.75
What's Included:
- Thru axle
- Washers
- Endcaps with bolts
Trainer Compatibility
The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions.
Bike Compatibility
Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
$39.99
Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.
$49.99
Take your KICKR MOVE ride experience to a whole new level. The KICKR CLIMB Base Adapter is required to use the KICKR MOVE in conjunction with a KICKR CLIMB.
NOTE: The use of KICKR CLIMB and KICKR MOVE together, require you to use the KICKR CLIMB base adapter to avoid damage to the KICKR CLIMB or other property.
$99.99
Wahoo's latest accessory for the KICKR Smart Trainer lets you worry less about your connection and focus on your virtual ride at hand. No more wireless drop outs or signal interference—KICKR Direct Connect attaches your KICKR to your router for a constant streaming virtual ride or race. Compatible with many 3rd party apps including The Wahoo SUF Training App, TrainerRoad, Fulgaz, and many more.
Note: KICKR Direct Connect is not compatible with previous KICKR editions, KICKR CORE, and KICK SNAP.
Don't Get Dropped
No more worrying about your wireless connection dropping during your virtual races and online group rides. KICKR Direct Connect provides a hard-wired solution from your KICKR Smart Trainer to your internet router.
Safe and Secure
To prevent damage to the Direct Connect Pod or your KICKR, Direct Connect has a Quick disconnect cable that is robust enough to stay attached during normal use but will easily break the connection if enough pressure is applied.
Zero Configuration
Direct Connect is built on Multicast DNS to provide a simple, plug-and-play solution to stay connected.
App Compatibility
KICKR Direct Connect is compatible with The Wahoo SUF Training App, Trainer Road, Rouvy, Fulgaz, bKool, RGT Cycling, and Veloreality, with more 3rd party partners coming in the future.
$299.99
The KICKR HEADWIND is the first ever smart fan, designed with the cyclist in mind. Its Targeted Airflow Pattern mirrors the shape and position of a cyclist's body while riding. The KICKR HEADWIND is sensor controlled so as your speed or heart rate increases, so will the fan speed, and there are also 4 manual speed settings should you want to set your own ideal airflow. With speeds of over 30 mph (48 kph), the KICKR HEADWIND will keep you cool during the toughest training sessions.
- With wind speeds topping out at over 30 mph the KICKR HEADWIND will keep you cool during your hardest efforts.
- The Targeted Airflow Pattern of the KICKR HEADWIND is designed to mirror the shape and position of a cyclist's body while riding on a bicycle.
- Control the speed of your KICKR HEADWIND by pairing your ANT+ speed sensor, heart rate monitor, or smart trainer directly to the fan. As your speed or heart rate increases so will the fan speed.
- Pair to the Wahoo App via Bluetooth for easy fan speed control at your fingertips.
- Control the KICKR HEADWIND with a simple press of a button. Four (4) preprogrammed fan speeds allow you to select your ideal airflow.
- The KICKR HEADWIND was specially designed to fit with the KICKR DESK. The wheels on the KICKR HEADWIND allow you to roll the fan into position when it is attached to your KICKR DESK.
$34.99
This kit includes drive side and non-drive side adapters for bicycles with 12x142 or 12x148 thru axles. Note: This adapter is compatible with KICKR CORE and KICKR v4(2018) and newer models of KICKR.
Note: Kit also includes Shimano style and SRAM XD/XDR style freehub lock nuts that need to be installed.
$79.99
The Wahoo KICKR Floormat is the perfect partner for your KICKR. It's water resistant and anti-slip to keep the trainer in place no matter how much you sweat! The thickness and material make it noise insulating, so your family will thank you during those early morning rides.
- Impervious to sweat and spilled water bottles.
- Gripping texture keeps the KICKR in place, so you can focus on your ride.
- Material helps to reduce noise and make the KICKR even quieter.
- Beveled edge keeps the mat in line with the floor.
$39.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- It only weighs 7 grams!
- Provides accurate cadence data during your ride
- (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties.
- The RPM can be worn on your shoe for spin classes or use with multiple bikes
- Two LED lights show the sensor's device connection (blue) and cadence detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM cadence sensor will fit with most bikes and frame sizes
$69.99
KICKR XDR Freehub body allows you to use your KICKR with the new SRAM AXS drive train system. This kit includes a 1.8mm spacer for XD compatibility.
Compatibility: KICKR '18, v5, v6, MOVE and KICKR CORE
$19.99
Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only
$249.99
The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds.
The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store.
The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers:
- T1980 Bushido (ANT+)
- T2020 i-Genius
- T2050 Tacx IRONMAN trainer
- T2060 Tacx IRONMAN Smart
- T2080 Genius Smart with Upgrade Smart
- T2170 i-Vortex
- T2180 Vortex Smart with Upgrade Smart
- T2240 Flow Smart with Upgrade Smart
- T2780 Bushido Smart with Upgrade Smart
$119.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training.
- Suitable for handlebars with a diameter ranging from 26mm to 35mm
- Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
$69.99
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.
$44.99 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
$69.99
- Large and rollable trainer mat
- Made from high quality, water-repellent 6mm thick foam
- Protects your floor against scratches and sweat
- Muffles noise and vibrations
- 180 x 85 cm
$109.99
Give your Galaxia or Anteres the best possible protection for storage or transport by using this sturdy trainer bag. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage. This bag is ideal for riders who take their rollers to the track with them to warm up.
$29.99
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.
$59.99
- Includes Sweatcover for Smartphone (T2931) and Towel (T2940)
- 891076
$39.99
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.
$29.99
This narrow towel was developed specifically for indoor bike training sessions and is used by many professional riders during their warm-up or indoor training sessions.
- Highly absorbent
- Measures 30cm x 115cm
$59.99
The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.
$99.99
Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.
$29.79
• Plastic riser block allows the position of front wheel at one of two heights
$8.79
Replacement straps for Sunlite FlatForm II pedals
- Strap size: 340 x 55mm
$49.99
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors.
- Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions.
- This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch.
- The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems.
- Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly.
What's Included
- Thru axle
- Washers
- End caps with bolts
$49.99
For a stable, worry-free ride with any rear wheel-mounted trainer.
Product Features
- For a stable, worry-free ride with any rear wheel-mounted trainer.
- Unique 3-level design lets you select the level of difficulty.
- Stack two blocks to simulate climbing workouts.
Three different positions to raise your front wheel and simulate hill climbs
- 2.1 inches (5.3 cm)
- 2.7 inches (6.8 cm)
- 3.1 inches (7.9 cm)
$24.99
The Saris Leveling Block keeps your bike level with your trainer.
- Adds stability to your training ride.
- For use with any rear wheel-mounted trainer.
- Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
Page 1 of 2
Next page