Skip to main content
PA
PALO ALTO
2011 El Camino Real
Palo Alto, CA 94306
Phone: (650) 853-3000
Open: Mon-Fri 11-7 Sat 10-7 Sun 10-6
Like The Bike Connection on Facebook! 
SF
SAN FRANCISCO
1090 Folsom St
San Francisco, CA 94103
On-Site Parking
Phone: (415) 934-8000
Open: Mon-Fri 11-7 Sat 10-7 Sun 10-6
Like The Bike Connection on Facebook! 

Filter By:

  • Show More Brands

  • Show Fewer Brands

Seatposts

$199.99 - $249.99
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel
$105.00 - $109.99
Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7. - Carbon shaft absorbs trail chatter - UD carbon shaft, forged aluminum head
$299.99
- Internal Routed, Infinitely Adjustable Design - Simplistic - Fully Sealed Alloy Cage / Stainless Tip Cartridge System - Durable 3D Forged Head - With 7075-T6 Forged Clamp - Featherlight Thumb Actuation - Industry Leading - Intelligent Keyway System - Ensures Minimal Play - Easiest Installation - Cable Head Attaches At Base - Cold Weather Approved - Tested Down To -20C. - 1x Lever included - With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware - Remote Position: On handlebar - Cable Routing: Internal - Offset: 0mm - Clamp Type: Standard, double bolt - Seat Post Material: Aluminum - Seat Post Weight: 510g
$119.99
A specific eTen hydraulic cartridge with single bolt offset saddle clamp allow the enjoyment of droppers at a low price, available with 100mm of travel. - Black hard anodized stanchion and an air spring, hydraulically locked cartridge - Single-bolt alloy head - Remote sold separately
$214.99
The all-new carbon Contact SLR TCR seatpost compliments the redesigned TCR’s outstanding performance though optimal aerodynamics and ultra-light weight. - Optimized for maximum aero performance at a super low weight - Compatible with model year 2021 and on TCR frames - Not compatible with pre-model year 2021 TCR frames
$195.00
Features - Anti-Twist Technology keeps the saddle firmly positioned - Steel proprietary air & oil cartridge offers smooth consistent load range adjustment - Internal cable routing - Secure 2-bolt clamp design with steel hardware - Clamp design compatible with standard 7mm (alloy) or 9mm (composite) saddle rails - Extra-long lower saddle rail guide designed to cradle lightweight saddle rails securely - Includes updated 2x remote lever
$199.99
The latest generation Thudbuster ST is superior to its predecessor in every way. Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, a higher rider weight limit, and additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design. By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made. - Travel: 50mm - Weight: 580g - Max Rider Weight: 330lbs
$285.00
- Designed using SRAM Exogram technology - Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately) - Matte Black finish
$285.00
- Designed using SRAM Exogram technology - Available the Zipp SL Speed DI2 Internal Battery Mount to hold a Shimano DI2 seatpost battery within the SL Speed seatpost. (Sold separately) - Matte Black finish - Seat Post Diameter: 31.6mm - Seat Post Length: 400mm
$179.99
The carbon Service Course SL seatpost is specifically tuned to be more shock absorbing than the "comfort" seatposts on the market, while still passing our strict internal MTB strength test. Flex engineered into the lightweight carbon tube keeps the rider comfortable over any terrain. Better fit means better performance, and if your saddle is out of position, you'll waste energy with every pedal stroke. The secure, two-bolt clamp makes for easy micro-adjustments of saddle position, and the head has been redesigned for maximum bolt-head accessibility. The Service Course SL seatpost makes it possible for nearly any rider to achieve the perfect fit, and the clamp works with all saddle rail types. - Distinctive Zipp cosmetics - Unidirectional Carbon fiber tuned for ride comfort - Lightweight clamping system - Lifetime warranty
$60.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored seatpost color is available on the Zipp Service Course Seatpost. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, we are proud to offer redesigned Service Course seatposts. - Material: 6061 aluminum - 2-bolt adjustability - Minimum insertion length: 90mm
$12.99
#901 7/8 top 10" x 1" - Seat Post Diameter: 25.4mm - Seat Post Length: 15'' - Offset: 0mm - Clamp Type: Post mount - Seat Post Material: Steel
$11.99
#901 7/8 top 10" x 1" - Seat Post Diameter: 13/16'' - Seat Post Length: 15.5'' - Offset: 0mm - Clamp Type: Post mount - Seat Post Material: Steel
$59.99
The Duncan 1.5 seatpost utilizes a high-end 7075 aluminum to create the best balance between stiffness and lightweight. The 2-bolt clamp is designed to ensure an easy setup and your saddle stays put. This model has a 10mm offset. - Designed and tested to meet Syncros' stringent standards for fatigue and impact strength. - 3D forged heat-treated aluminum tube - Proven Syncros clamp design for ease of adjustment - Compatible from 7x7mm up to 7x10mm rails, incl. carbon rails - Length: 400mm - Weight: 265g
$59.99
The Duncan 1.5 seatpost utilizes a high-end 7075 aluminum to create the best balance between stiffness and lightweight. The 2-bolt clamp is designed to ensure an easy setup and your saddle stays put. This model has a 25mm offset. - Designed and tested to meet Syncros' stringent standards for fatigue and impact strength. - 3D forged heat-treated aluminum tube - Proven Syncros clamp design for ease of adjustment. Compatible from 7x7mm up to 7x10mm rails incl. carbon rails. - Compatible from 7x7mm up to 7x10mm rails, carbon rails inclusive - Length: 400mm
$199.99
SL stands for Super Light, our top of the range ultralight carbon fibre seatpost. KEY FEATURES - Carbon UD seatpost - SL- Super Light - Available in 27.2 or 31.6mm RANGE OF USE: MTB/ROAD MATERIAL: Carbon UD, Superlight Layup DIAMETER: 27.2, 31.6mm OFFSET: 10 mm Offset RAILS COMPATIBILITY: Compatible from 7x7mm up to 7x9mm rails LENGTH: 400mm WEIGHT: 185g (27.2x400mm)
$179.99
Our Duncan SL seatpost is produced from high-end and super-light carbon fiber which combined with an optimized layup makes for an excellent balance between light weight, stiffness and comfort. The 2-bolt clamp is designed to ensure that your setup is easy and your saddle stays put. - Syncros engineered carbon construction offers an optimized blend of strength and lightweight - Proven Syncros clamp design for ease of adjustment - Compatible from 7x7mm up to 7x10mm rails, carbon rails inclusive - Weight: 185g (27.2x400mm) - Length: 400mm - Carbon UD, Superlight Layup
$199.99
The Syncros FL1.0 Carbon Offset Seatposts utilize an optimized carbon layup to best balance stiffness and comfort into a lightweight structure. The multi-rail-compatible 2-bolt clamp and anti-slip design ensure that your setup is easy and your saddle stays right where you put it. - Material: Carbon Ud - Rails compatibility: 7x7mm to 7x10mm, carbon rails inclusive - Rails: Round/oval saddle rails - Weight: 210 grams (31.6mm)
$69.99
The Syncros FL1.5 seatpost utilizes a high-end 7075 aluminum to best balance stiffness and lightweight. The multi-rail-compatible 2-bolt clamp and anti-slip design ensure that your setup is easy and your saddle stays right where you put it. - Material: Alloy AL7050 - Rail compatibility: 7.7mm-7x10mm, carbon rails inclusive - Rails: round/oval saddle rails - Weight: 265 grams (31.6mm)
$69.99
Syncros FL1.5 seatposts utilize a high-end 7075 aluminum to create the best balance between stiffness and low weight. The 2-bolt clamp is designed to ensure an easy setup and your saddle stays put. - Designed and tested to meet Syncros' stringent standards for fatigue and impact strength. - 3D forged heat-treated aluminum tube - Proven Syncros clamp design for ease of adjustment. Compatible from 7x7mm up to 7x10mm rails, carbon rails inclusive.
$269.99
The Duncan TRI seatpost is constructed from carbon fiber for ultimate weight saving. The saddle is mounted to a sliding rail, which allows for a wide range of adjustment. - Sliding mount for rail - Carbon fiber - Compatible with Plasma 6 only
$299.99
Our Duncan Aero seatpost is optimized for the Scott Addict road bike with a dedicated profile. Constructed from super light carbon fiber the layup is optimized for an excellent balance between light weight, stiffness and comfort. The 2-bolt clamp is designed to ensure that your setup is easy and your saddle stays put. This model has an offset of 20mm.
$229.99 - $269.99
The Syncros Dropper 2.0 seatpost give you the freedom to quickly switch from sprinting uphill or attacking down a descent with the simple press of the remote. Internal cable routing, infinite steps and 150mm of travel round out this package.
$43.99
• Aluminum • Coil spring provides plush suspension • Adjustable pre-load design • Micro-adjust seat clamp • 450 grams
$17.99
- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams
$25.99
• Forged aluminum • Integrated micro-adjust seat clamp
$1.99
- Chrome - Sold individually
$33.99
• Aluminum • Coil spring suspension • Adjustable pre-load design • Collar adjustment for play removal • 7/8-inch seat-clamp diameter
$7.99 - $12.59
• Steel • Polished-chrome finish • 7/8-inch seat-clamp diameter
$19.99 - $21.99
• Unicycle-specific seatpost
Page 1 of 3 Next page