Skip to main content
PA
PALO ALTO
Like The Bike Connection on Facebook!
SF
SAN FRANCISCO
1090 Folsom St
San Francisco, CA 94103
On-Site Parking
(415) 934-8000
Open: Mon - Sat 11-7
Sun 11-6
Like The Bike Connection on Facebook!

Filter By:

Parts & Accessories

NiteRider Lumina Helmet Mount
$19.99
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
Giant Recon E HL HB Mount
$5.99
A universal quick release mount that attaches to round-shaped drop and flat handlebars.
Planet Bike Aero Mount Tail Light Bracket
$6.99
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal
Planet Bike BRT Strap Light
$14.99
Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.
No Image
$4.99
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
Lezyne Aluminum Handle Bar Mount
$15.99
Lezyne's Aluminum Handle Bar Mount is a CNC-machined aluminum hard mount with a reinforced Composite Matrix cradle that securely holds the Mega Drive, Deca Drive, and XL LED lights. It is designed either for 25.4mm or 31.8mm bars, with the cradle designed to pivot 15 degrees of lateral adjustment to direct light where it is most needed. The hinged clamshell design provides a great grip that is ideal for large lights. A large thumb screw secures the AL mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine tune fitting to undersized bars. Aluminum Bar Mounts are sold separately and are not included with the Mega Drive, Deca Drive, or XL LED lights kit.
Lezyne CR 2032 Battery (8-pack)
$10.49
Replacement lithium ion CR2032 batteries for use in the Femto LED lights. SPEC: 700 mAh, 3.6V.
Lezyne End Plug - Strip Drive F/R
$3.99
Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights
Lezyne End Plug - Y10 Hecto/Micro Drive
$3.99
Replacement rubber end plug for the Hecto Drive, Micro Drive or Mini Drive lights.
Lezyne End Plug - Y10 KTV Drive F/R
$3.99
Replacement rubber end plug for the KTV Front, KTV Rear and KTV Pro Rear lights.
Lezyne Go-Pro LED Adapter
$3.99
Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.
Lezyne LED Handle Bar Mount
$8.49
Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.
Lezyne LED Handle Bar Mount Adapter
$3.49
Lezyne's LED Handle Bar Mount Adapter is a composite matrix adapter to replace the rubber strap that ships on 2016 and later models of Macro XL, Power XL, Super XXL, and Deca XXL lights, so that they can be used with the Aluminum Handlebar Mount, the Composite Handlebar Mount, Aluminum Helmet Mount, or Composite Handlebar Mount.
Knog PWR Headtorch (Strap Only)
$32.95
Using this strap allows the user to create a headtorch ranging from 1000-2000 lumens, dependent on light head & battery combination. * Note, this product does not include the PWR bank or PWR light head as shown in this image. - 170g
Knog PWR Redcap + Helmet Mount
$32.95
An attachment to use when mounting your PWR Rider or PWR Commuter bike lights to your helmet. PWR Red Cap gives you a 12 lumen narrow rear light beam for day & night visibility. Use the Modemaker app to program your rear light. - Includes: - PWR Red Cap Rear Light - Helmet Mount (also works with GoPro mount) - Adaptor - Hex Keys
Cygolite Helmet Mount for Expilion/Metro/Streak Series Lights
$13.95
Helmet mount kit compatible with Ranger, Expilion, Metro Pro and Plus, Metro, Streak, and Pace systems. - Includes: helmet bracket, velcro strap, and foam pad.
Cygolite Locktite Handlebar Bracket for Expilion/Metro/Streak Series Lights
$14.95
2nd generation Locktite™ tool-free handlebar bracket mount for Ranger, Expilion, Metro Pro and Plus, Metro, Streak and Pace systems. Compatible with 22 to 32mm diameter handlebars.
Page 1 of 1