Seatposts

Features - Anti-Twist Technology keeps the saddle firmly positioned - Steel proprietary air & oil cartridge offers smooth consistent load range adjustment - Internal cable routing - Secure 2-bolt clamp design with steel hardware - Clamp design compatible with standard 7mm (alloy) or 9mm (composite) saddle rails - Extra-long lower saddle rail guide designed to cradle lightweight saddle rails securely - Includes updated 2x remote lever

Giant's Vector Seatpost offers superb aerodynamics, low weight, and the vibration damping high-end carbon is known for. The adjustable clamp head can be set up to provide either -5 or 25mm offset without any additional parts or tools.

Cane Creek's Thudbuster Seatpost adds comfort to any hardtail bike. Using a parallel-linkage design, the Thudbuster moves down and back at the same rate as the rear wheel moves forward and up when you hit a bump, helping you maintain control. The post and linkage is made of aluminum with Teflon coated steel bushings so you know it's built to last. And, the interchangeable elastomers (sold separately) can be easily exchanged to your preferences.

Zipp's Service Course Seatpost is stiff, light, has excellent gripping power, and the low-profile clamp allows you to slide the saddle extra far back on the rails. The shaft and head are 3D forged from a single piece of light, tough 7075 aluminum, and the clamp even features downward-facing bolts for micro-adjustments to achieve that perfect fit.

Strong, yet light as a whisper, Zipp's Service Course SL is everything you could want in a seatpost. It's forged out of a single piece of tough 7075 aluminum, yet weighs just 220 grams. A low-profile clamp allows you to slide the saddle extra far back on the rails, giving you more room to optimize your position. The clamp even features downward-facing bolts for micro-adjustments to achieve that perfect fit.

Zipp's SL Speed Seatpost has become a favorite of pro road and cyclocross racers because of its light weight and dependability. - Titanium hardware; black, red and white nut retainers included - Minimum insertion length is 100mm - Dual-bolt, low-profile micro-adjust cradle - UD carbon post, head, and clamps

The 3D forged and highly adjustable Descendant seatpost is built to do its job so that you can do yours. Set it, forget it, and go harder. - Easy-to-adjust dual bolt head design - Forged and butted 7050 shaft - Forged seat clamps - Max Height: 250mm - Min Height: 40mm - Clamp Style: Standard Rails - Material: Aluminum

New Guts, New Glory Don’t let its familiar good looks fool you—Reverb is a whole new weapon. Its internals have been completely re-engineered to improve on its already legendary performance and to offer enhanced reliability: all the smallest details, down to the single seal, have been re-evaluated and updated to pass the hardest and longest durability tests. This is the brand-new Reverb, engineered for the next-generation mountain biker. - Completely redesigned internals with new SKF internal floating piston - Improved performance and durability in all conditions - Increased bushing overlap - New dedicated post length per travel length - WEIGHT: 520g (Weight based on 340mm post length, 30.9mm diameter, 100mm travel, MMX remote with shifter hardware and 1300 hose) - LENGTH: 340mm, 390mm - COLORS: Black - MATERIAL: Shaft: 3D forged 7050 alloy , Head: 7050 forged alloy - OTHER: Zero offset , remote: adjustable return speed at the handlebar, discrete or Match Maker X, left or right

New Guts, New Glory Don’t let its familiar good looks fool you—Reverb is a whole new weapon. Its internals have been completely re-engineered to improve on its already legendary performance and to offer enhanced reliability: all the smallest details, down to the single seal, have been re-evaluated and updated to pass the hardest and longest durability tests. Additional bushing overlap also improves performance over time, while new 150- and 170-millimeter travel options are available to tame even the gnarliest of descents. This is the brand-new Reverb, engineered for the next-generation mountain biker. - Completely redesigned internals with new SKF internal floating piston - Improved performance and durability in all conditions - 150mm and 170mm travel options available in all diameters - Increased bushing overlap - New dedicated post length per travel length - WEIGHT: 560g (weight based on 340mm post, 30.9mm diameter, 100mm travel, MMX remote with shifter hardware and 1300mm hose) - LENGTH: 340mm, 390mm, 440mm, 480mm - COLORS: Black - MATERIAL: Shaft: 3D forged 7050 alloy , Head: 7050 forged alloy - OTHER: Zero Offset , Remote: Adjustable return speed at the handlebar, Discrete or Match Maker X, Left or right - AVAILABLE IN: Travel: 100/125/150/170mm ; Diameter: 30.9/31.6/34.9mm

The RockShox Reverb 1x remote pairs the ergonomics of SRAM’s shifter design and low-lever-force hydraulic actuation to the internally routed Reverb Stealth B1 so riders can use their Reverb posts quicker, more easily and often, for better ride control on the trail. Reverb's 1x Remote’s Bleeding Edge fitting makes bleeding quick and simple, with an updated fluid path and bleed porting to make it easier to push fluid through the system, and a dedicated bleed adapter that plugs into the bleed port and seals the system to minimize air contamination and fluid loss - Adjustable return speed by turning the collar on the remote - MatchMaker X or discrete clamp options included - 2000mm hose length - Adjustment: Infinite - Remote Position: Left

Ritchey's Comp Link reimagines the two-bolt post, making it lighter, more compliant, and more versatile than ever. The patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo rails. - 6061 aluminum 2-piece press-fit construction - Diameters: 27.2 and 31.6mm - Offset: 20mm - Reversible clamp allows for an additional 10mm of fore-aft saddle adjustment - Length: 400mm - 284g (27.2x400mm)

Introducing the Aeffect Dropper Post. A budget friendly but rock solid option for riders wanting to enter the dropper market. A sealed damping system wrapped in 7075 aluminium makes for a lightweight dropper that can take the hits. Internal cable routing compatible for modern frame design and available in the two most popular drop measurements, it's easy to swap out your standard post and upgrade your ride. - Cable actuated, hydraulic cartridge - Infinite adjust within travel - Return speed adjustable (150mm only) - Same 2 bolt clamp system as Ride and Chester posts - Ergonomic 1x lever sold separately - Compatible with the Turbine universal and 1x levers - Standard shifter cable and housing

- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset

- Intended for cross country, all-mountain, enduro and downhill use - Patented I-Beam Micro System- single bolt head with precise fore, aft and angle adjustment - The shaft is manufactured with a leading edge composite material allowing high strength at an impressively low weight. The engineered carbon layup tube offers outstanding fatigue & - Head is made of cold-forged AL -6061; clamps are AL-2014 - Easy-access 5mm bolt for quick and simple saddle adjustments - 190 grams

Giant's Alloy Seatpost is dependable and respectably light at a great price. It boasts a single bolt micro-adjust clamp so you can dial in a great saddle position.

Giant's Aluminum Replacement Seatpost is dependable and respectably light at a great price. It boasts a single bolt micro-adjust clamp so you can dial in your saddle position.

Let Giant's Comfort Suspension Seatpost take the sting out of cycling. This plush shock-absorbing post mutes road vibration and ensures rider comfort.

Giant's Connect Seatpost is tough and durable thanks to its forged 6061 aluminum construction. The reversible outer clamp design allows for 12mm or 23mm offset options and the extra-long saddle clamp is compatible with lightweight carbon rails.

Giant's Contact Composite Seatpost features a spiral-wound, unidirectional composite shaft bonded to a 2D forged 6061 aluminum head, making it both lightweight and strong. The reversible outer clamp allows for 12mm or 23mm offset options and the extra-long lower rail clamp is compatible with lightweight saddle rails.

Giant's Contact SL Seatpost is made from 3D-forged, single-piece aluminum, making it super strong. It uses a clever reversible head to give you either 12 or 23mm of offset and its interchangeable clamp design is compatible with both 7mm alloy and 9mm composite saddle rails. Plus, the extra-long saddle clamp cradles lightweight saddle rails securely.

Features - Anti-Twist Technology keeps the saddle firmly positioned - Proprietary alloy air & oil cartridge offers smooth consistent load range adjustment - Improved design easily switches from external to internal cable routing - Secure 2-bolt clamp design with Ti hardware - Clamp design compatible with standard 7mm (alloy) or 9mm (composite) saddle rails - Extra long lower saddle rail guide designed to cradle lightweight saddle rails securely - Includes new shifter style 1x lever Vertical travel: - 340mm - 100mm travel - 395mm - 125mm travel - 440mm - 150mm travel

Giant Contact SLR Seatpost features an ultra light single piece molded full-composite construction for a compliant ride. With an interchangeable clamp design for 7mm alloy or 9mm carbon saddle rails. Features - One-piece molded composite shaft and head - Clamp fits standard 7mm alloy saddle rails (9mm carbon saddle rail clamp sold separate) - Reversable outer clamp design allows for 12mm or 23mm offset options - Extra long lower saddle rail guide designed to cradle lightweight saddle rails securely

Giant's Contact SLR Seatpost is made for the fastest riders on the fastest bikes, meaning you and your steed. This full-carbon beauty barely weighs a thing, is super strong, and uses a clever reversible head to give you either 12 or 23mm of offset. Its interchangeable clamp design is compatible with both 7mm alloy and 9mm composite saddle rails. Plus, the extra-long saddle clamp is friendly with lightweight carbon rails.

- Giant proprietary D-Fuse seatpost - Composite construction with Alloy clamp - Zero offset configuration - 380mm length

- Giant Variant carbon seatpost - Fits 2016+ TCR Advanced models (non-ISP)

FSA's Afterburner is a tough, lightweight seatpost that works great on road and mountain bikes. Its 1-piece 3D-forged aluminum construction makes it strong and stable while remaining light. And, it's super easy to adjust thanks to the convenient 2-bolt clamp.

Add a little cush to your ride with Evo's Cushy ST Suspension Seatpost. It gives you 50mm of travel to take the edge off of rough trails and even pot-holed city streets. The post is made from aluminum and it uses a steel coil spring with an adjustable preload.

Easton's EA50 Seatpost is rugged, reliable and perfect for all your cycling adventures. It's made from 2014-aluminum with Easton's TaperWall technology that controls the post's internal thickness, adding material where you need it and none where you don't. It provides excellent strength and durability while keeping the weight low. Plus, the EA50 boasts an easy-to-use 2-bolt clamp for secure seat adjustments.

A sweet upgrade for your ride, Easton's EA70 Offset seatpost is a proven staple of strength and reliability. It's built with Easton's TaperWall technology, which customizes the thickness of the aluminum walls to optimize strength without excess material. And, the integrated two-bolt clamp allows for precise, easy seat adjustments.

A sweet upgrade for your ride, Easton's EA70 seatpost is a proven staple of strength and reliability. It's built with Easton's TaperWall technology, which customizes the thickness of the aluminum walls to optimize strength without excess material. And, the integrated two-bolt clamp allows for precise, easy seat adjustments.